DATV-Express and MiniTiouner-Express Download Center
MiniTiouner-Express User Guide Manual
(For software registration and download, see details in User Manual)
DATV-Express Manuals and reference material
Download USER GUIDE for Windows PDF (Draft12 for v1.25 - does NOT yet describe the support for PLUTO and LimeSDR)
Download PRELIMINARY NOTES_v1.25LP10 TXT for Windows (revised 2018-09-11 for Express_DVB-S_Transmitter Beta-software v1.25LP10)
Download PRELIMINARY NOTES_v1.25LP9 TXT for Windows (revised 2018-08-10 for Express_DVB-S_Transmitter Beta-software v1.25LP9)
Download PRELIMINARY NOTES_v1.25 TXT for Windows (revised 2017-06-20 for Express_DVB-S_Transmitter Beta-software v1.25)
Download NOTES_v1.23 TXT for Windows (revised 2017-03-19 for Express_DVB-S_Transmitter Beta-released-software v1.23)
Download NOTES TXT for Windows (revised 2016-08-28 for Express_DVB-S_Transmitter production-released-software v1.11)
Download README TXT (revised 2014-11-12 to add ODROID v2.03)
SOFTWARE DEBIAN INSTALL for Linux
Express_DVB-S_Transmitter SOFTWARE INSTALL for Windows
This experimental v1.25LP10 software can support four DATV exciters
- DATV-Exciter board
- LimeSDR board
- LimeSDR-mini board
- PLUTO board
This BETA Windows application is still likely to be full of bugs. We are expecting you to break it!.
EARLY/OBSOLETE EXPERIMENTAL PLUTO-Express SOFTWARE INSTALL for Windows
PLUTO-Express software is for running ADALM-PLUTO SDR Tx/Rx hardware board on a windows PC to transmit DATV. This software can also be configured to run a DATV-Express modulator board.
This early-alpha release is experimental and is likely to be full of bugs. It are provided as a service to the DATV-Express community.
EXPERIMENTAL DatvExpress-Utils SOFTWARE INSTALL for Windows
DatvExpressServerApp is an alpha-release program to transmit DVB-S DATV running only on a windows PC with the hardware board. (no Linux) This software was a pre-cursor to the Express_DVB-S_Transmitter software.
DatvExpressSdrApp is an alpha-release program running on a windows PC to transmit FM or SSB with the hardware board. (no Linux needed)
All these applications are experimental and are likely to be full of bugs. They are provided as a service to the DATV-Express community.
DATV-Express PCBA Block Diagram